Gloves

Description

Suitable for short-term protection during cleaning work with solvents and painting work as well as when working with sealants.  All gloves are non-sterile, powder-free, left & right fitting and protective gloves in accordance with Regulation (EU) 2016/425 for personal protective equipment, category III.

Latex gloves natural

• Very elastic: elasticity min. 650%
• With polymer inner coating
• Micro-roughened surface
• Wall thickness: hand min. 0.08 mm, fingers min. 0.08 mm
• Tear resistance min. 6N
• Norm:
  • EN 455-1, EN 455-2, EN 455-3, EN 455-4
  • EN ISO 374-1, EN ISO 374-2, EN ISO 374-4, EN ISO 374-5
  • EN 16523-1:2015+A1:2018
  • EN ISO 21420:2020
  • EN 420:2003+A1:2009
  • AQL 1,5

Nitrile gloves blue

• Elastic: Elasticity min. 500%
• Micro-roughened surface
• Latex and silicone-free
• Wall thickness: hand approx. 0.07 mm, fingers approx. 0.10 mm
• Tear resistance min. 6N
• Norm:
  • EN 455-1, EN 455-2, EN 455-3, EN 455-4
  • EN ISO 374-1, EN ISO 374-2, EN ISO 374-4, EN ISO 374-5
  • EN 16523-1:2015+A1:2018
  • EN ISO 21420:2020
  • AQL 1,5

Nitrile gloves black

• With textured fingertips (good tactile sensitivity)
• Latex and silicone-free
• Elastic: Elasticity min. 500%
• Wall thickness: hand approx. 0.07 mm, fingers approx. 0.09 mm
• Tear resistance min. 6N
• Normen:
  • EN 455-1, 2, 3, 4
  • EN ISO 374-1, 2, 4, 5
  • EN 16523-1:2015+A1:2018
  • DIN EN ISO 21420:2020
  • AQL 1,5

Nitrile chemical protection gloves blue

• Very thick wall thickness: hand approx. 0.19 mm, fingers approx. 0.23 mm
• Elastic: Elasticity min. 500%
• Micro-roughened surface
• Latex and silicone-free
• Tear resistance min. 6N
• Norm:
  • EN 455-1, EN 455-2, EN 455-3, EN 455-4
  • EN ISO 374-1, EN ISO 374-2, EN ISO 374-4, EN ISO 374-5
  • EN 16523-1:2015+A1:2018
  • EN ISO 21420:2020
  • AQL 1,5